资源类型

期刊论文 53

年份

2023 18

2022 5

2021 2

2020 1

2019 4

2018 4

2017 2

2016 2

2015 3

2014 3

2012 1

2011 2

2009 1

2008 2

2007 3

展开 ︾

关键词

亚麻屑纤维素 1

共热解 1

分子链取向 1

吸附 1

改性 1

木聚糖 1

木质素 1

正渗透 1

活性翠蓝 1

电场 1

相转化 1

离子液体 1

纤维素 1

纤维素膜 1

纳米纤维 1

聚乙烯 1

聚环氧乙烷 1

膜制备 1

静电纺丝 1

展开 ︾

检索范围：

排序： 展示方式：

Integrating of metal-organic framework UiO-66-NH2 and cellulose nanofibers mat for high-performance adsorption

《化学科学与工程前沿（英文）》 2022年 第16卷 第9期   页码 1387-1398 doi: 10.1007/s11705-022-2154-2

摘要： UiO-66-NH2 is an efficient material for removing pollutants from wastewater due to its high specific surface area, high porosity and water stability. However, recycling them from wastewater is difficult. In this study, the cellulose nanofibers mat deacetylated from cellulose acetate nanofibers were used to combine with UiO-66-NH2 by the method of in-situ growth to remove the toxic dye, rose bengal. Compared to previous work, the prepared composite could not only provide ease of separation of UiO-66-NH2 from the water after adsorption but also demonstrate better adsorption capacity (683 mg∙g‒1 (T = 25 °C, pH = 3)) than that of the simple UiO-66-NH2 (309.6 mg∙g‒1 (T = 25 °C, pH = 3)). Through the analysis of adsorption kinetics and isotherms, the adsorption for rose bengal is mainly suitable for the pseudo-second-order kinetic model and Freundlich model. Furthermore, the relevant research revealed that the main adsorption mechanism of the composite was electrostatic interaction, hydrogen bonding and π–π interaction. Overall, the approach depicts an efficient model for integrating metal-organic frameworks on cellulose nanofibers to improve metal-organic framework recovery performance with potentially broad applications.

关键词： UiO-66-NH2     cellulose nanofibers     rose bengal     adsorption     mechanism    

HTML PDF 收藏

Construction of NiCoO nanoflake arrays on cellulose-derived carbon nanofibers as a freestanding electrode

《化学科学与工程前沿（英文）》 2023年 第17卷 第6期   页码 691-703 doi: 10.1007/s11705-022-2268-6

摘要： Cellulose has a wide range of applications in many fields due to their naturally degradable and low-cost characteristics, but few studies can achieve cellulose-nanofibers by conventional electrospinning. Herein, we demonstrate that the freestanding cellulose-based carbon nanofibers are successfully obtained by a special design of electrospinning firstly, pre-oxidation and high-temperature carbonization (1600 °C), which display a superior electrical conductivity of 31.2 S·cm–1 and larger specific surface area of 35.61 m2·g–1 than that of the polyacrylonitrile-based carbon nanofibers (electrical conductivity of 18.5 S·cm–1, specific surface area of 12 m2·g–1). The NiCo2O4 nanoflake arrays are grown uniformly on the cellulose-based carbon nanofibers successfully by a facile one-step solvothermal and calcination method. The as-prepared cellulose-based carbon nanofibers/NiCo2O4 nanoflake arrays are directly used as electrodes to achieve a high specific capacitance of 1010 F·g–1 at 1 A·g–1 and a good cycling stability with 90.84% capacitance retention after 3000 times at 10 A·g–1. Furthermore, the all-solid-state symmetric supercapacitors assembled from the cellulose-based carbon nanofibers/NiCo2O4 deliver a high energy density of 62 W·h·kg–1 at a power density of 1200 W·kg–1. Six all-solid-state symmetric supercapacitors in series can also power a ‘DHU’ logo consisted of 36 light emitting diodes, confirming that the cellulose-based carbon nanofiber is a promising carbon matrix material for energy storage devices.

关键词： cellulose     carbon nanofibers     NiCo2O4     supercapacitors    

HTML PDF 收藏

Hydrophobic nanocellulose aerogels with high loading of metal-organic framework particles as floating and reusable oil absorbents

Jiajia Li, Shengcheng Zhai, Weibing Wu, Zhaoyang Xu

《化学科学与工程前沿（英文）》 2021年 第15卷 第5期   页码 1158-1168 doi: 10.1007/s11705-020-2021-z

摘要： In this paper, we employed a facile approach to prepare flexible and porous metal-organic frameworks (MOFs) containing cellulose nanofiber (CNF) aerogels (MNCAs) through freeze-drying MOF-containing cellulose nanofiber suspensions. After coating with methyltrimethoxysilane (MTMS) by chemical vapor deposition, recycled and hydrophobic MTMS-coated MNCAs (MMNCAs) were obtained. Due to the low density (0.009 g/cm ), high porosity (97%) and good mechanical properties of the aerogel, the adsorption capacity of MMNCAs reached up to 210 g/g, which was nearly 3‒5 times that of pure CNF aerogels. These prepared aerogels showed excellent oil/water selectivity and high capacity to adsorb oil and organic solvents. This kind of cellulose-based aerogel may be applicable in the field of environmental protection.

关键词： cellulose nanofibers     aerogels     metal-organic framework     oil-adsorption    

HTML PDF 收藏

DEGRADATION OF ORGANIC POLLUTANTS IN FLOCCULATED LIQUID DIGESTATE USING PHOTOCATALYTIC TITANATE NANOFIBERS

《农业科学与工程前沿（英文）》 2023年 第10卷 第3期   页码 492-502 doi: 10.15302/J-FASE-2023503

摘要：

● Titanate NFs were synthesized and photodegraded liquid digestate for the first time.

关键词： titanate nanofibers     photocatalysis     poultry litter liquid digestate    

HTML PDF 收藏

Sustainable conversion regenerated cellulose into cellulose oleate by sonochemistry

《化学科学与工程前沿（英文）》 2023年 第17卷 第8期   页码 1096-1108 doi: 10.1007/s11705-023-2317-9

摘要： Derivatization has great potential for the high-value utilization of cellulose by enhancing its processability and functionality. However, due to the low reactivity of natural cellulose, it remains challenging to rapidly prepare cellulose derivatives with high degrees of substitution. The “cavitation effect” of ultrasound can reduce the particle size and crystalline index of cellulose, which provides a possible method for preparing cellulose derivatives. Herein, a feasible method was proposed for efficiently converting regenerated cellulose to cellulose oleate with the assistance of ultrasonic treatment. By adjusting the reaction conditions including ultrasonic intensity, feeding ratios of oleic acid, reaction time, and reaction solvent, a series of cellulose oleates with degrees of substitution ranging from 0.37 to 1.71 were synthesized. Additionally, the effects of different reaction conditions on the chemical structures, crystalline structures, and thermal behaviors were investigated thoroughly. Cellulose oleates with degrees of substitution exceeding 1.23 exhibited amorphous structures and thermoplasticity with glass transition temperatures at 159.8 to 172.6 °C. This study presented a sustainable and practicable method for effectively derivatizing cellulose.

关键词： regenerated cellulose     cellulose oleate     sonochemistry     degree of substitution     thermoplasticity    

HTML PDF 收藏

Recent progress in electrospun nanofibers and their applications in heavy metal wastewater treatment

《化学科学与工程前沿（英文）》 2023年 第17卷 第3期   页码 249-275 doi: 10.1007/s11705-022-2245-0

摘要： Novel adsorbents with a simple preparation process and large capacity for removing highly toxic and nondegradable heavy metals from water have drawn the attention of researchers. Electrospun nanofiber membranes usually have the advantages of large specific surface areas and high porosity and allowing flexible control and easy functionalization. These membranes show remarkable application potential in the field of heavy metal wastewater treatment. In this paper, the electrospinning technologies, process types, and the structures and types of nanofibers that can be prepared are reviewed, and the relationships among process, structure and properties are discussed. On one hand, based on the different components of electrospun nanofibers, the use of organic, inorganic and organic−inorganic nanofiber membrane adsorbents in heavy metal wastewater treatment are introduced, and their advantages and future development are summarized and prospected. On the other hand, based on the microstructure and overall structure of the nanofiber membrane, the recent progresses of electrospun functional membranes for heavy metal removal are reviewed, and the advantages of different structures for applications are concluded. Overall, this study lays the foundation for future research aiming to provide more novel structured adsorbents.

关键词： electrospinning     heavy metal     adsorption     nanostructure     wastewater    

HTML PDF 收藏

Flexible, ultrathin, and multifunctional polypyrrole/cellulose nanofiber composite films with outstanding

《化学科学与工程前沿（英文）》 2023年 第17卷 第8期   页码 1028-1037 doi: 10.1007/s11705-022-2251-2

摘要： Electrodes that combine energy storage with mechanical and photothermal performance are necessary for efficient development and use of flexible energy storage and conversion devices. In this study, the flexible, ultrathin, and multifunctional polypyrrole/cellulose nanofiber composite films were fabricated via a one-step “soak and polymerization” method. The dense sandwich structure and strong interfacial interaction endowed polypyrrole/cellulose nanofiber composite films with excellent flexibility, outstanding mechanical strength, and desired toughness. Interestingly, the polypyrrole/cellulose nanofiber composite film electrodes with quaternary amine functionalized cellulose nanofiber had the highest specific mass capacitance (392.90 F∙g–1) and specific areal capacitance (3.32 F∙cm–2) than the electrodes with unmodified and carboxyl functionalized cellulose nanofibers. Further, the polypyrrole/cellulose nanofiber composite films with sandwich structure had excellent photothermal conversion properties. This study demonstrated a feasible and versatile method for preparing of multifunctional composite films, having promising applications in various energy storage fields.

关键词： cellulose nanofiber     electrochemical     photothermal conversion     polypyrrole    

HTML PDF 收藏

Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes

《化学科学与工程前沿（英文）》 2023年 第17卷 第5期   页码 504-515 doi: 10.1007/s11705-022-2260-1

摘要： Phenolic resins were employed to prepare electrospun porous carbon nanofibers with a high specific surface area as free-standing electrodes for high-performance supercapacitors. However, the sustainable development of conventional phenolic resin has been challenged by petroleum-based phenol and formaldehyde. Lignin with abundant phenolic hydroxyl groups is the main non-petroleum resource that can provide renewable aromatic compounds. Hence, lignin, phenol, and furfural were used to synthesize bio-based phenolic resins, and the activated carbon nanofibers were obtained by electrospinning and one-step carbonization activation. Fourier transform infrared and differential scanning calorimetry were used to characterize the structural and thermal properties. The results reveal that the apparent activation energy of the curing reaction is 89.21 kJ·mol–1 and the reaction order is 0.78. The activated carbon nanofibers show a uniform diameter, specific surface area up to 1100 m2·g–1, and total pore volume of 0.62 cm3·g–1. The electrode demonstrates a specific capacitance of 238 F·g–1 (0.1 A·g–1) and good rate capability. The symmetric supercapacitor yields a high energy density of 26.39 W·h·kg–1 at 100 W·kg–1 and an excellent capacitance retention of 98% after 10000 cycles. These results confirm that the activated carbon nanofiber from bio-based phenolic resins can be applied as electrode material for high-performance supercapacitors.

关键词： lignin     bio-based phenolic resins     electrospinning     activated carbon nanofibers     supercapacitors    

HTML PDF 收藏

Influence of coagulation bath on morphology of cellulose membranes prepared by NMMO method

LU Yangcheng, WU Yingxin

《化学科学与工程前沿（英文）》 2008年 第2卷 第2期   页码 204-208 doi: 10.1007/s11705-008-0027-y

摘要： To control the morphology of cellulose membranes used for separation, they were prepared by the NMMO method using water, methanol, ethanol and their binary solution as coagulation baths. Morphologies of the surface and cross section of dry membranes were observed. The pore structure parameters of wet membranes were determined. By comparison, the process and mechanism of pore formation in dry membranes were suggested, and the relativity of cellulose crystal size to average pore diameter in wet membranes and their influences were discussed. The results show that the morphology of dry membranes is clearly varied with coagulation baths, while the porosity of wet membranes is almost constant. Porous structures can appear in the compact region of dry membranes due to swelling from water. These pores have a virtual effect on the average pore diameter of wet membranes. By changing the composition of coagulation baths, the microstructure of cellulose membranes in a dry or wet environment can be adjusted separately.

关键词： comparison     NMMO     constant     diameter     process    

HTML PDF 收藏

Review on cellulose paper-based electrodes for sustainable batteries with high energy densities

《化学科学与工程前沿（英文）》 2023年 第17卷 第8期   页码 1010-1027 doi: 10.1007/s11705-023-2307-y

摘要： Powering the future, while maintaining strong socioeconomic growth and a cleaner environment, is going to be one of the biggest challenges faced by mankind nowadays. Thus, there is a transition from the use of fossil fuels to renewable energy sources. Cellulose, the main component of paper, represents a unique type of bio-based building blocks featuring exciting properties: low-cost, hierarchical fibrous structures, hydrophilicity, biocompatible, mechanical flexibility, and renewability, which make it perfect for use in paper-based sustainable energy storage devices. This review focuses on lithium-ion battery application of celluloses with cellulose at different scales, i.e., cellulose microfibers, and nanocellulose, and highlights the new trends in the field. Recent advances and approaches to construct high mass loading paper electrodes toward high energy density batteries are evaluated and the limitations of paper-based cathodes are discussed. This will stimulate the use of natural resources and thereby the development of renewable electric energy systems based on sustainable technologies with low environmental impacts and carbon footprints.

关键词： cellulose     paper electrodes     Li-ion batteries     high energy density    

HTML PDF 收藏

Bioinspired cellulose-based membranes in oily wastewater treatment

《环境科学与工程前沿（英文）》 2022年 第16卷 第7期 doi: 10.1007/s11783-021-1515-2

摘要：

• Cellulose-based membrane separates oily wastewater mimicking the living things.

关键词： Cellulose     Bioinspired membrane     Superhydrophobic surface     Underwater superoleophobic surface     Oil-water separation    

HTML PDF 收藏

Research progress on low dielectric constant modification of cellulose insulating paper for power transformers

《化学科学与工程前沿（英文）》 2023年 第17卷 第8期   页码 991-1009 doi: 10.1007/s11705-022-2259-7

摘要： Because of the increase in the transmission voltage levels, the demand for insulation reliability of power transformers has increasingly become critical. Cellulose insulating paper is the main insulating component of power transformers. To improve the insulation level of ultrahigh voltage transformers and reduce their weight and size, reducing the dielectric constant of oil-immersed cellulose insulating paper is highly desired. Cellulose is used to produce power-transformer insulating papers owing to its excellent electrical properties, renewability, biodegradability and abundance. The dielectric constant of a cellulose insulating paper can be effectively reduced by chemical or physical modification. This study presents an overview of the foreign and domestic research status of the use of modification technology to reduce the dielectric constant of cellulose insulating papers. All the mentioned methods are analyzed in this study. Finally, some recommendations for future modified cellulose insulating paper research and applications are proposed. This paper can provide a reference for further research on low dielectric constant cellulose insulating paper in the future.

关键词： low dielectric constant     chemical and physical modification     cellulose insulating paper     transformer     nanomaterials.    

HTML PDF 收藏

Nano-copper ions assembled cellulose-based composite with antibacterial activity for biodegradable personal

《化学科学与工程前沿（英文）》 2023年 第17卷 第10期   页码 1544-1554 doi: 10.1007/s11705-022-2288-2

摘要： The current SARS-CoV-2 pandemic has resulted in the widespread use of personal protective equipment, particularly face masks. However, the use of commercial disposable face masks puts great pressure on the environment. In this study, nano-copper ions assembled cotton fabric used in face masks to impart antibacterial activity has been discussed. To produce the nanocomposite, the cotton fabric was modified by sodium chloroacetate after its mercerization, and assembled with bactericidal nano-copper ions (about 10.61 mg·g–1) through electrostatic adsorption. It demonstrated excellent antibacterial activity against Staphylococcus aureus and Escherichia coli because the gaps between fibers in the cotton fabric allow the nano-copper ions to be fully released. Moreover, the antibacterial efficiency was maintained even after 50 washing cycles. Furthermore, the face mask constructed with this novel nanocomposite upper layer exhibited a high particle filtration efficiency (96.08% ± 0.91%) without compromising the air permeability (28.9 min·L–1). This green, economical, facile, and scalable process of depositing nano-copper ions onto modified cotton fibric has great potential to reduce disease transmission, resource consumption, and environmental impact of waste, while also expanding the range of protective fabrics.

关键词： cellulose-based     nanocomposite     biodegradable antibacterial fabric     nano-copper ions     face masks    

HTML PDF 收藏

Simple fabrication of carboxymethyl cellulose and κ-carrageenan composite aerogel with efficient performance

《环境科学与工程前沿（英文）》 2022年 第16卷 第10期 doi: 10.1007/s11783-022-1568-x

摘要：

● A composite aerogel was simply obtained to remove various fluoroquinolones (FQs).

关键词： Composite aerogel of carboxymethyl cellulose and κ-carrageenan     Fluoroquinolone antibiotics     Adsorption performance     Coexisting substances     Adsorption mechanism     Reusability    

HTML PDF 收藏

Dialdehyde cellulose nanocrystal cross-linked chitosan foam with high adsorption capacity for removal

《化学科学与工程前沿（英文）》 2023年 第17卷 第7期   页码 853-866 doi: 10.1007/s11705-022-2256-x

摘要： The discharge of large amounts of dye-containing wastewater seriously threats the environment. Adsorbents have been adopted to remove these dyes present in the wastewater. However, the high adsorption capacity, predominant pH-responsibility, and excellent recyclability are three challenges to the development of efficient adsorbents. The poly(acryloxyethyl trimethylammonium chloride)-graft-dialdehyde cellulose nanocrystals were synthesized in our work. Subsequently, the cationic dialdehyde cellulose nanocrystal cross-linked chitosan nanocomposite foam was fabricated via freeze-drying of the hydrogel. Under the optimal ratio of the cationic dialdehyde cellulose nanocrystal/chitosan (w/w) of 12/100, the resultant foam (Foam-12) possesses excellent absorption properties, such as high porosity, high content of active sites, strong acid resistance, and high amorphous region. Then, Foam-12 was applied as an eco-friendly adsorbent to remove acid red 134 (a representative of anionic dyes) from aqueous solutions. The maximum dye adsorption capacity of 1238.1 mg∙g‒1 is achieved under the conditions of 20 mg∙L‒1 adsorbents, 100 mg∙L‒1 dye, pH 3.5, 24 h, and 25 °C. The dominant adsorption mechanism for the anionic dye adsorption is electrostatic attraction, and Foam-12 can effectively adsorb acid red 134 at pH 2.5–5.5 and be desorbed at pH 8. Its easy recovery and good reusability are verified by the repeated acid adsorption–alkaline desorption experiments.

关键词： chitosan foam     cellulose nanocrystals     acid red 134     adsorption    

HTML PDF 收藏

标题 作者 时间 类型 操作

Integrating of metal-organic framework UiO-66-NH2 and cellulose nanofibers mat for high-performance adsorption

期刊论文

Construction of NiCoO nanoflake arrays on cellulose-derived carbon nanofibers as a freestanding electrode

期刊论文

Hydrophobic nanocellulose aerogels with high loading of metal-organic framework particles as floating and reusable oil absorbents

Jiajia Li, Shengcheng Zhai, Weibing Wu, Zhaoyang Xu

期刊论文

DEGRADATION OF ORGANIC POLLUTANTS IN FLOCCULATED LIQUID DIGESTATE USING PHOTOCATALYTIC TITANATE NANOFIBERS

期刊论文

Sustainable conversion regenerated cellulose into cellulose oleate by sonochemistry

期刊论文

Recent progress in electrospun nanofibers and their applications in heavy metal wastewater treatment

期刊论文

Flexible, ultrathin, and multifunctional polypyrrole/cellulose nanofiber composite films with outstanding

期刊论文

Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes

期刊论文

Influence of coagulation bath on morphology of cellulose membranes prepared by NMMO method

LU Yangcheng, WU Yingxin

期刊论文

Review on cellulose paper-based electrodes for sustainable batteries with high energy densities

期刊论文

Bioinspired cellulose-based membranes in oily wastewater treatment

期刊论文

Research progress on low dielectric constant modification of cellulose insulating paper for power transformers

期刊论文

Nano-copper ions assembled cellulose-based composite with antibacterial activity for biodegradable personal

期刊论文

Simple fabrication of carboxymethyl cellulose and κ-carrageenan composite aerogel with efficient performance

期刊论文

Dialdehyde cellulose nanocrystal cross-linked chitosan foam with high adsorption capacity for removal

期刊论文